OEM Volkswagen Red Conduit for Coilpack harness

Did you change out your factory coil packs for red ones? Why not complete the look with this Genuine European coil pack harness conduit. Enhance the look of your engine bay with this OE+ cover.

Please note, this conduit requires several modifications for 1.8T engines. It requires 1 hole to be drilled to fit 2.0T FSI engines. It requires several modifications to fit 2.0T TSI engines. See notes below.

1.8T engines require the following modifications to this part in order to fit this engine:

• A notch will have to be cut for ground wire to pass through between cylinders #1 and #2.
• The mounting tabs are not used, you may cheese to remove these for aesthetics (dremel, cutoff wheel or file)
• Trimming of the rear leg to clear the valve cover (dremmel or cutoff wheel)

2.0T FSI engines require the following modifications to this part in order to fit this engine:

• Drilling of a small hole to allow the diverter valve harness to pass-through.
• The clip on the driver’s side is not used, you may choose to remove this appendage or leave in place.

2.0T TSI engines require the following modifications to this part in order to fit this engine:

• Drilling of a small hole to allow the exhaust cam phaser harness to pass-through.
• Removal of the mounting tabs (dremel, cutoff wheel or file).
• The clip on the driver’s side is not used, you may choose to remove this appendage or leave in place.

This Part Fits the Following Vehicles